Clean, rhythm and lead at the tip of your toe. Quite ancient preamp now but it works well for certain situations.
With two low impedance outputs you can put it in the FX loop if you want to avoid your amp's preamp section or you can use the "Mixer signal" with the built in Red Box Pro straight into the line - in of your recording interface.
Don't put it in front of your amp though, stacking two preamp sections might work but most of the time it doesn't.
Technical Specs:
Input
Impedance 1 Mohm
Min. level -40 dB
Nominal level -26 dB
Max. level +17 dB
Output to Guitar Power Amp
Impedance 220 ohms
Max. level +12 dB
Output to Mixer
Impedance 220 ohms
Max. level +6 dB
Current consumption 540 mA at 13.1 V
Max. power draw 7.1 VA
Tube type 1 ECC 83 or 12AX7A
No comments:
Post a Comment